AD-2001 Enthone – Hysol Retarder – Gallon

AD-2001 Enthone – Hysol Retarder – Gallon

$478.20

Most epoxy inks can be modified with thinners, retarders, flattening paste, reducers, or clear bases. Before adding any of these products, please refer to the specific ink technical data sheet for additive proportion instructions.

AD-2001 Enthone – Hysol Retarder – Gallon

Retarder for Enthone 50 series CAT-L-INK

Most epoxy inks can be modified with thinners, retarders, flattening paste, reducers, or clear bases. Before adding any of these products, please refer to the specific ink technical data sheet for additive proportion instructions.

SCREEN PRINTING OR USING 2 PART EPOXY PASTE INKS

THINNING: If thinning is required, add small amounts of AD-2001 thinner. Additions should be made after the induction period. Thinner additions extend the pot life. AD-2001 Thinner for nominal adjustments in viscosity. Incrementally add 3-6% by weight.

SPRAYING: Following the induction period, thin with AD-2002 or a blend of 80% PM glycol ether and 20% methyl isobutyl ketone at 25-40% by volume, depending on air pressure and orifice of spray unit. Thinner additions will extend the pot life considerably. AD-2002 Thinner for spray applications. Add 25-40% by volume.

RETARDING: Small amounts of AD-2003 or carbitol acetate are recommended. Additions should only be made after the induction period has been observed. AD-2003 Retarder to extend open time. Incrementally add 3-6% by weight.

REMOVAL: Enthone SC1710 screen cleaner, AD-2003 or any lacquer wash will effectively clean stamps, screens, and equipment before the ink cures.

THIS IS CONSIDERED A HAZARDOUS PRODUCT AND CAN ONLY SHIP GROUND

There are no reviews yet.

Be the first to review “AD-2001 Enthone – Hysol Retarder – Gallon”

Your email address will not be published. Required fields are marked *