Enthone M0N/20A Black Gloss Conductive – 10cc Bi-Pack

Enthone M0N/20A Black Gloss Conductive – 10cc Bi-Pack

$70.50

Superior adhesion to epoxy, glass, metal or other nonporous surfaces designed for rubber stamping or offset printing.

M0N/20A Enthone Hysol Black Gloss Conductive – 10cc  Bi-Pack

Size: 1/3 Ounce Bi-Pak

Catalyst: Comes with the 20/A catalyst.

Color: Black

Meets: CID A-A-56032D Types I & II, Conductive.

Formerly: MIL-I-43553b

Characteristics: Superior adhesion to epoxy, glass, metal or other nonporous surfaces designed for rubber stamping or offset printing. Excellent resistance to abrasion, MEK, alcohol, TCE, flux removers, salt, acid and alkali solutions when properly cured. When used with a rubber stamp, use a brayer roller or similar device to roll the ink into a thin drawn down before transferring to the stamp.

Please let us know if you need the Glass Plate, and Roller, and the type of marking device needed to complete your order.

MIXING INSTRUCTIONS
Measure ink and catalyst at the proper mix ratio. Both the ink and catalyst should be weighed accurately. Excessive and insufficient amounts of catalyst are detrimental to cured ink film properties. Mix thoroughly without introducing excessive amounts of air. Avoid the use of paper or wax coated cups. Stir from bottom of the container

OBSERVE INDUCTION PERIOD

All catalysts: 30 minutes
Catalysts 45 and 5: 60 minutes
Allow ink/catalyst mixture to stand for at least 30 minutes prior to application. This provides an induction period ensuring a homogeneous mix of resin and catalyst and allows any entrapped air to escape from the mixture. The average pot life begins after the induction period.

COMMERCIAL ITEM DESCRIPTION
INK, MARKING, EPOXY BASE

Certified to MIL-I-43553 and AA56032.

The General Services Administration has authorized the use of this commercial item description (CID) as a replacement for MIL-I-43553B and MIS-37271 by all federal agencies.

1. SCOPE. This commercial item description covers a catalyzed epoxy system of marking inks for metallic or other non-porous surfaces and printed wiring boards.
2. CLASSIFICATION.
2.1 Type. The marking ink and color shall be of the following types and colors, as specified:

Type I    – General usage
Type III – Outside exposure.

There are no reviews yet.

Be the first to review “Enthone M0N/20A Black Gloss Conductive – 10cc Bi-Pack”

Your email address will not be published. Required fields are marked *